High Quality Latest Leads4pass IT Cert Exam Dumps

The Latest Microsoft, Cisco, CompTIA And Other Exam Dumps Questions And Answers Free Update

Microsoft

[High Quality Exam Dumps] 100% Pass High Quality Microsoft MCSD 70-357 Dumps Exam Resources Youtube Free Shared (Q1-Q10)

admin 0 Comments

Prepare for Microsoft 70-357 exam with best useful Microsoft MCSD 70-357 dumps pdf training resources and study guides download free try from lead4pass. “Developing Mobile Apps” is the name of Microsoft MCSD https://www.leads4pass.com/70-357.html exam dumps which covers all the knowledge points of the real Microsoft exam.

Get your Microsoft MCSD 70-357 dumps exam preparation questions in form of 70-357 PDF. Lead4pass is the best site for providing online preparation material for 70-357 exam. If you are looking to get 70-357 certification by passing exam 70-357 then you can pass it in one go. 100% passing guarantee and full refund in case of failure.

Download free latest Microsoft 70-357 dumps pdf resources: https://drive.google.com/open?id=0B_7qiYkH83VReG00STg0a29TTDQ

Download free latest Microsoft 70-740 dumps pdf resources: https://drive.google.com/open?id=0B_7qiYkH83VRUXhnaEJiSlRLek0

High Quality Microsoft MCSD 70-357 Dumps Exam Questions And Answers (Q1-Q10)

QUESTION 1
You have an app that includes the following method:
70-357 dumps
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
70-357 dumps
Correct Answer:
70-357 dumps
Box 1: No
When neither DesiredAccuracyInMeters nor DesiredAccuracy are set, your app will use an accuracy setting of 500 meters (which corresponds to the DesiredAccuracy setting of Default). Setting DesiredAccuracy to Default or High indirectly sets DesiredAccuracyInMeters to 500 or 10 meters, respectively.
Box 2: No
The Default value should be used to optimize for power, performance, and other cost considerations.
The High value should be used to deliver the most accurate report possible. This includes using services that might charge money, or consuming higher levels of battery power or connection bandwidth. An accuracy level of High may degrade system performance and should be used only when necessary.

QUESTION 2
You must create a control that meets the following requirements:
• allows you to extend the behavior of a combo box allows the arrow image is located at the right edge of a standard control to be replaced with a new image
• has a property that sets and returns the image
•has a visual interface of the control that is defined by using XAML
•defines the properties for the control in code
You need to create the control.
Which object should you use?
A. ContentDialog
B. StaticResource
C. ThemeResource
D. UserControl
Correct Answer: A

Explanation:
ContentDialog represents a dialog box that can be customized to contain checkboxes, hyperlinks, buttons and any other XAML content.

QUESTION 3
You are developing a Universal Windows Platform (UWP) app that processes and displays data from your company’s personnel database.
Users report that one of the views in the UWP app loads slowly.
You need to optimize the load time.
How should you complete the relevant markup? To answer, select the appropriate markup segment from each list in the answer area.
70-357 dumps
Correct Answer:
70-357 dumps
Explanation:
70-357 dumps
The {x:Bind} markup extension—new for Windows 10—is an alternative to {Binding}.
{x:Bind} lacks some of the features of {Binding}, but it runs in less time and less memory than {Binding} and supports better debugging.
In the following example, the background and foreground of the item are bound to functions to do conversion based on the color parameter
<DataTemplate x:DataType=”local:ColorEntry”>
<Grid Background=”{x:Bind Brushify(Color)}” Width=”240″>
<TextBlock Text=”{x:Bind ColorName}” Foreground=”{x:Bind TextColor(Color)}” Margin=”10,5″ />
</Grid>
</DataTemplate>

QUESTION 4
You are developing a Universal Windows Platform (UWP) app.
The app does not display content properly on mobile devices.
You need to support smaller window sizes. 70-357 dumps
How should you complete the relevant XAML markup? To answer, select the appropriate markup segment from each list in the answer area.
70-357 dumps
Correct Answer:
70-357 dumps
Explanation:
70-357 dumps
One of the tools that Microsoft gives us for building adaptive UIs in UWP apps is state triggers. The version of Windows 10 released at BUILD 2015 features one state trigger: a class named AdaptiveTrigger. AdaptiveTrigger has two important properties:
MinWindowWidth and MinWindowHeight. You use AdaptiveTrigger in conjunction with Visual State Manager to adapt the UI to screens and windows of various sizes.
* Inline
The pane is always visible and doesn’t overlay the content area. The pane and content areas divide the available screen real estate.
* CompactInline
A narrow portion of the pane is always visible in this mode, which is just wide enough to show icons. The default closed pane width is 48px, which can be modified with CompactPaneLength. If the pane is opened, it will reduce the space available for content, pushing the content out of its way.

QUESTION 5
You are developing a Universal Windows Platform (UWP) a pp.
The app has the following requirements:
. Users must be able to authenticate with the app by using a third-party OAuth provider.
. Users must have the option of using Single Sign-On.
You obtain the security identifier (SID) for the app from the Windows Dev Center.
You need to implement authentication for the app.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
70-357 dumps
Correct Answer:
70-357 dumps
Explanation:
70-357 dumps
Step 1: Register your app with your online provider
You must register your app with the online identity provider to which you want to connect.
You can find out how to register your app from the identity provider. After registering, the online provider typically gives you an Id or secret key for your app.
Step 2: Build the authentication request URI
The request URI consists of the address where you send the authentication request to your online provider appended with other required information, such as an app ID or secret, a redirect URI where the user is sent after completing authentication, and the expected response type. You can find out from your provider what parameters are required.
Step 3-4: Connect to the online provider
You call the AuthenticateAsync method to connect to the online identity provider and get an access token. The method takes the URI constructed in the previous step as the requestUri parameter, and a URI to which you want the user to be redirected as the callbackUri parameter.
Note: Step 5: Connecting with single sign-on (SSO).
By default, Web authentication broker does not allow cookies to persist. Because of this, even if the app user indicates that they want to stay logged in (for example, by selecting a check box in the provider’s login dialog), they will have to login each time they want to access resources for that provider. To login with SSO, your online identity provider must have enabled SSO for Web authentication broker, and your app must call the overload of AuthenticateAsync that does not take a callbackUri parameter. This will allow persisted cookies to be stored by the web authentication broker, so that future authentication calls by the same app will not require repeated sign-in by the user (the user is effectively “logged in” until the access token expires).

QUESTION 6
Note: This question it part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
You are developing a Universal Windows Platform (UWP) app.
Your app stores files on a user’s device.
You need to be able to replace the existing files with new files generated by the user.
Solution you run the StoragaFile.GetParentAsync method to get a reference to the existing file. Then, you run the StorageFile.CreateStreamedFileAsyne method to create the- new file at that same location.
Does this meet the goal?
A. yes
B. No
Correct Answer: A

Explanation:
The GetParentAsync() method gets the parent folder of the current file.
The CreateStreamedFileAsync method can be used to create a StorageFile that can be passed to other methods or passed to another app through app contracts.

QUESTION 7
You are developing a Universal Windows Platform (UWP) app.
You need to implement responsive user design patterns.
Which of the following techniques are supported? To answer, select the appropriate option from each list in the answer area.
70-357 dumps
Correct Answer:
70-357 dumps
Explanation:
70-357 dumps
Responsive design techniques
When you optimize your app’s UI for specific screen widths, we say that you’re creating a responsive design. Here are six responsive design techniques you can use to customize your app’s UI.
* Reposition
You can alter the location and position of app UI elements to get the most out of each device
* Resize
You can optimize the frame size by adjusting the margins and size of UI elements.
* Reflow
By changing the flow of UI elements based on device and orientation, your app can offer an optimal display of content-
* Show/hide
You can show or hide UI elements based on screen real estate, or when the device supports additional functionality, specific situations, or preferred screen orientations.
* Replace
This technique lets you switch the user interface for a specific device size-class or orientation. In this example, the nav pane and its compact, transient UI works well for a smaller device, but on a larger device tabs might be a better choice.
* Re-architect
You can collapse or fork the architecture of your app to better target specific devices.

QUESTION 8
You are developing a Universal Windows Platform (UWP) app that uses XAML and C#.
The app must use the Model-View-ViewModel (MVVM) pattern.
The user interface (UI) triggers an event.
You need to bind the event to a view model method.
What should you do?
A. Create a custom behavior and attach the behavior to the UI element. Bind the behavior’s event trigger to the command declared in the view model.
B. Create an attached property of type ICommand. Bind the UI element’s event to the attached property.
C. Assign the value of the DataContext property to the view model. Use the BindingExression.UpdateSource() method to update the data source.
D. Add a strongly-typed view model property to the view. In the code behind file for the view, invoke the view model method.
Correct Answer: B

Explanation:
Commands are an implementation of the ICommand interface that is part of the .NET Framework. This interface is used a lot in MVVM applications.

QUESTION 9
You are designing a roadside assistance mobile app. The app displays a persistent list of links to pages. The app displays a persistent list of links to pages. The pages provide a quick way to move between different views of the a pp.
You need to recommend a user interface pattern that meets the following requirements:
• Allow users to navigate to frequently accessed, distinct content categories,
• Provide two or more content pones that have corresponding category headers.
• Display the navigation controls on the top of the screen.
• Highlight the currently selected navigation control.
Which pattern should you recommend?
A. hub
B. tabs and pivots
C. active canvas
D. master/details
Correct Answer: B

Explanation:
The Pivot control and related tabs pattern are used for navigating frequently accessed, distinct content categories. Pivots allow for navigation between two or more content panes and relies on text headers to articulate the different sections of content. 70-357 dumps Tabs are a visual variant of Pivot that use a combination of icons and text or just icons to articulate section content. Tabs are built using the Pivot control.

QUESTION 10
You are developing a Universal Windows Platform (UWP) app by using XAML and C#. A team member has written a XAML page that includes a button with an event handler method named ButtonSendNotification_Click() registered to the Click event.
You are reviewing the following code segment written by the team member (line numbers are added for reference only):
70-357 dumps
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each selection is worth one point.
70-357 dumps
Correct Answer:
70-357 dumps

Why Select Lead4pass?

Lead4pass is the best provider of IT learning materials and the right choice for you to pass Microsoft 70-357 exam. Other brands started earlier, but the questions are not the newest and the price is relatively expensive. Lead4pass provide the latest real and cheapest questions and answers, help you pass Microsoft 70-357 exam easily at first try.
70-357 dumps

The Following Are Some Reviews From Our Customers:

70-357 dumps
You can click here to have a review about us: https://www.resellerratings.com/store/lead4pass

Newest helpful Microsoft MCSD 70-357 dumps exam practice files in PDF format free download from lead4pass. The best and most updated latest Microsoft MCSD https://www.leads4pass.com/70-357.html dumps pdf training resources which are the best for clearing 70-357 exam test, and to get certified by Microsoft MCSD. You can download Microsoft MCSD 70-357 dumps pdf training material from lead4pass and pass the Microsoft 70-357 exam in the first attempt.

Microsoft

[High Quality Exam Dumps] Right Choice for Microsoft 70-534 Dumps Exam Free Youtube Demo

admin 0 Comments

Why choose lead4pass Microsoft 70-534 dumps exam? It is the right choice for Microsoft 70-534 dumps exam. Lead4pass offers best Microsoft Specialist: Microsoft Azure 70-534 dumps exam training resources in PDF format free download. Useful Microsoft Specialist: Microsoft Azure 70-534 dumps pdf files and vce youtube demo update free shared. “Architecting Microsoft Azure Solutions” is the name of Microsoft Specialist: Microsoft Azure https://www.leads4pass.com/70-534.html exam dumps which covers all the knowledge points of the real Microsoft Specialist: Microsoft Azure. Latest Microsoft Specialist: Microsoft Azure 70-534 dumps exam practice questions and answers update free try, pass Microsoft 70-534 exam test quickly and easily at first attempt.

High quality Microsoft 70-534 dumps pdf files: https://drive.google.com/open?id=0B_7qiYkH83VRX0JJVFo2eEctTW8

High quality Microsoft 70-533 dumps pdf files: https://drive.google.com/open?id=0B_7qiYkH83VRZF9feEh5eDcwVzA
70-534 dumps

Best Microsoft Specialist: Microsoft Azure 70-534 dumps exam questions and answer (1-15)

QUESTION 1
You need to assign permissions for the Virtual Machine workloads that you migrate to Azure.
The solution must use the principal of least privileges.
What should you do?
A. Create all VMs in the cloud service named Groupl and then connect to the Azure subscription.
Run the following Windows PowerShell command:
New-AzureRoleAssignment -Mail [email protected] -RoleDefinitionName Contributor – ResoureeGroupName group1
B. In the Azure portal, select an individual virtual machine and add an owner.
C. In the Azure portal, assign read permission to the user at the subscription level.
D. Create each VM in a separate cloud service and then connect to the Azure subscription. Run the following Windows PowerShell command:
Get-AzureVM | New-AzureRoleAssignment -Mail [email protected] -RoleDefinitionName Contributor
Correct Answer: A

QUESTION 2
You need to design the system that alerts project managers to data changes in the contractor information app.
Which service should you use?
A. Azure Mobile Service
B. Azure Service Bus Message Queueing
C. Azure Queue Messaging
D. Azure Notification Hub
Correct Answer: B

QUESTION 3
You need to recommend a solution that allows partners to authenticate.
Which solution should you recommend?
A. Configure the federation provider to trust social identity providers.
B. Configure the federation provider to use the Azure Access Control service.
C. Create a new directory in Azure Active Directory and create a user account for the partner.
D. Create an account on the VanArsdel domain for the partner and send an email message that contains the password to the partner.
Correct Answer: B

QUESTION 4
You are designing a plan to deploy a new application to Azure. The solution must provide a single sign-on experience for users. 70-534 dumps
You need to recommend an authentication type.
Which authentication type should you recommend?
A. SAML credential tokens
B. Azure managed access keys
C. Windows Authentication
D. MS-CHAP
Correct Answer: A

QUESTION 5
You need to prepare the implementation of data storage for the contractor information app.
What should you?
A. Create a storage account and implement multiple data partitions.
B. Create a Cloud Service and a Mobile Service. Implement Entity Group transactions.
C. Create a Cloud Service and a Deployment group. Implement Entity Group transactions.
D. Create a Deployment group and a Mobile Service. Implement multiple data partitions.
Correct Answer: B

Explanation:
/ VanArsdel needs a solution to reduce the number of operations on the contractor information table.
Currently, data transfer rates are excessive, and queue length for read/write operations affects performance.

QUESTION 6
You need to ensure that users do not need to re-enter their passwords after they authenticate to cloud applications for the first time.
What should you do?
A. Enable Microsoft Account authentication.
B. Set up a virtual private network (VPN) connection between the VanArsdel premises and Azure datacenter. Set up a Windows Active Directory domain controller in Azure VM. Implement Integrated Windows authentication.
C. Deploy ExpressRoute.
D. Configure Azure Active Directory Sync to use single sign-on (SSO).
Correct Answer: D

QUESTION 7
You need to recommend data storage mechanisms for the solution.
What should you recommend? To answer, drag the appropriate data storage mechanism to the correct information type. Each data storage mechanism may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Select and Place:
70-534 dumps
Correct Answer:
70-534 dumps
QUESTION 8
You need to confgure the deployment of the storage analysis applicaton.
What should you do?
A. Create a new Mobile Service.
B. Confgure the deployment from source control.
C. Add a new deployment slot.
D. Turn on contnuous integraton.
Correct Answer: B

QUESTION 9
You are planning an upgrade strategy for an existing Azure application. Multiple instances of the application run in Azure. The management team is concerned about application downtime due to a business service level agreement (SLA).
You are evaluating which change in your environment will require downtime. You need to identify the changes to the environment that will force downtime.
Which change always requires downtime?
A. Adding an HTTPS endpoint to a web role
B. Upgrading the hosted service by deploying a new package
C. Changing the value of a configuration setting
D. Changing the virtual machine size
Correct Answer: A

QUESTION 10
An application currently resides on an on-premises virtual machine that has 2 CPU cores 4 GB of RAM 20 GB of hard disk space and a 10 megabit/second network connection. 70-534 dumps
You plan to migrate the application to Azure. You have the following requirements:
You must not make changes to the application.
You must minimize the costs for hosting the application.
You need to recommend the appropriate virtual machine instance type.
Which virtual machine tier should you recommend?
A. Network Optimized (A Series)
B. General Purpose Compute Basic Tier (A Series)
C. General Purpose Compute Standard Tier (A Series)
D. Optimized Compute (D Series)
Correct Answer: B

QUESTION 11
You are designing an Azure development environment. Team members learn Azure development techniques by training in the development environment.
The development environment must auto scale and load balance additional virtual machine (VM) instances. You need to recommend the most cost-effective compute-instance size that allows team members to work with Azure in the development environment.
What should you recommend?
A. Azure Al standardVM Instance
B. Azure A2 basic VM Instance
C. Azure A3 basic VM Instance
D. Azure A9 standard VM Instance
Correct Answer: A

QUESTION 12
You are designing an Azure application. The application includes services hosted in different geographic locations. The service locations may change.
You must minimize the cost of communication between services.
You need to recommend an approach for data transmission between your application and Azure services.
The solution must minimize administrative effort.
What should you recommend?
A. Azure Table storage
B. Service Bus
C. Service Management API
D. Azure Queue storage
Correct Answer: B

QUESTION 13
You are running a Linux guest in Azure Infrastructure-as-a-Service (IaaS). You must run a daily maintenance task. The maintenance task requires native BASH commands.
You need to configure Azure Automation to perform this task.
Which three actions should you perform? Each correct answer presents part of the solution.
A. Create an automation account.
B. Create an Orchestrator runbook.
C. Create an asset credential.
D. Run the Invoke-Workflow Azure PowerShell cmdlet.
E. Import the SSH PowerShell Module.
Correct Answer: ACE

QUESTION 14
You are designing an Azure web application.
All users must authenticate by using Active Directory Domain Services (AD DS) credentials. You need to recommend an approach to enable single sign-on to the application for domain-authenticated users. Which two actions should you recommend? Each correct answer presents part of the solution.
A. Use Forms authentication to generate claims.
B. Use the SQL membership provider in the web application.
C. Use Windows Identity Foundation in the web application.
D. Use Active Directory Federation Services (AD FS) to generate claims.
Correct Answer: C

QUESTION 15
You are designing an Azure application that will use a worker role. The worker role will create temporary files.
You need to minimize storage transaction charges. 70-534 dumps
Where should you create the files?
A. In Azure local storage
B. In Azure Storage page blobs
C. On an Azure Drive
D. In Azure Storage block blobs
Correct Answer: A

Here are some reviews from our customers:


Click here to have a review about us: https://www.resellerratings.com/store/lead4pass

Newest Microsoft Specialist: Microsoft Azure 70-534 dumps pdf practice materials and study guides free download from lead4pass. The best and most updated latest Microsoft Specialist: Microsoft Azure https://www.leads4pass.com/70-534.html dumps pdf training resources which are the best for clearing 70-534 exam test, and to get certified by Microsoft Microsoft Specialist: Microsoft Azure, free download with high pass guarantee.

Latest Microsoft Specialist: Microsoft Azure 70-534 dumps vce youtube: https://youtu.be/yN_VWCJcXgo

Why Lead 4 pass?

Lead4pass is the best IT learning material provider. Other brands appeared early, the questions are not the latest and it is vert expensive. Lead4pass provide the newest and cheapest questions and answers. Lead 4 pass is the correct choice for IT learning materials, help you pass your exam easily.

Microsoft

[High Quality Exam Dumps] Microsoft SharePoint Applications 70-480 Dumps Exam Questions And Answers Update Youtube Demo

admin 0 Comments

High quality Microsoft SharePoint Applications 70-480 dumps exam questions and answers free download from lead4pass. “Programming in HTML5 with JavaScript and CSS3” is the name of Microsoft SharePoint Applications https://www.leads4pass.com/70-480.html exam dumps which covers all the knowledge points of the real Microsoft exam. Helpful Microsoft SharePoint Applications 70-480 dumps pdf resources and vce youtube demo free shared.

Latest Microsoft SharePoint Applications 70-480 dumps pdf practice files and study guides free download from lead4pass. The best and most updated useful Microsoft SharePoint Applications 70-480 dumps exam training materials free try, pass Microsoft 70-480 exam test easily at the first time.

Best Microsoft 70-480 dumps pdf questions and answers: https://drive.google.com/open?id=0B_7qiYkH83VRQTNabE5YSjVzT1U

Best Microsoft 70-486 dumps pdf questions and answers: https://drive.google.com/open?id=0B_7qiYkH83VRMDRTbjBZUUNoUmc
70-480 dumps
QUESTION 1
You are developing a web page for runners who register for a race. The page includes a slider control that allows users to enter their age.
You have the following requirements:
– All runners must enter their age.
– Applications must not be accepted from runners less than 18 years of age or greater than 90 years.
– The slider control must be set to the average age (37) of all registered runners when the page is first displayed.
You need to ensure that the slider control meets the requirements.
What should you do? (To answer, drag the appropriate word or number to the correct location in the answer area. Each word or number may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Select and Place:
70-480 dumps
Correct Answer:
70-480 dumps
QUESTION 2
You are developing a customer contact form that will be displayed on a page of a company’s website. The page collects information about the customer.
If a customer enters a value before submitting the form, it must be a valid email address.
You need to ensure that the data validation requirement is met.
What should you use?
A. <input name=”email” type=”url”/>
B. <input name=”email” type=”text” required=”required”/>
C. <input name=”email” type=”text”/>
D. <input name=”email” type=”email”/>
Correct Answer: D

QUESTION 3
You are developing a web page by using HTML5 and C5S3. The page includes a <div>tag with the ID set to validate.
When the page is rendered, the contents of the <div>tag appear on a line separate from the content above and below it.
The rendered page resembles the following graphic.
70-480 dumpsThe page must be rendered so that the <div>tag is not forced to be separate from the other content. 70-480 dumps The following graphic shows the correctly rendered output.
70-480 dumps
You need to ensure that the page is rendered to meet the requirement.
Which line of code should you use?
A. document.getElementById(“validate”).style.display = “inline”;
B. document.getElementById(“validate”).style.margin = “0”;
C. document.getElementById(“validate”).style.padding = “0”;
D. document.getElementSyId(“validate”).style.display = “block”;
Correct Answer: A

QUESTION 4
You are developing an online shopping application that accepts credit cards for payment.
If the credit card number is invalid, the application must:
– Generate an error
– Assign “200” to the error number
– Assign “Invalid” to the error description
You need to write the code that meets the requirements.
How should you write the code? (To answer, drag the appropriate code segment or segments to the correct location in the answer area. Each code segment may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Select and Place:
70-480 dumps
Correct Answer:
70-480 dumps
QUESTION 5
You are developing a page that includes text and an illustration. 70-480 dumps The web page resembles the following image.
70-480 dumps
You have the following requirements:
1. The illustration must be in the center of the page.
2. The text must flow around the left, right, top, and bottom of the illustration.
You need to ensure that the layout of the web page meets the requirements.
Which line of code should you use?
A. -ms-wrap-side: both;
B. -ms-wrap-side: clear;
C. -ms-wrap-side: maximum;
D. -ms-wrap-side: auto;
Correct Answer: A

QUESTION 6
You develop an HTML application that is located at www.adventure-works.com. The application must load JSON data from www.fabrikam.com.
You need to choose an approach for loading the data.
What should you do?
A. Add a crossdomain.xml file to the second server.
B. Configure Cross-Origin Resource Sharing (CORS) on the servers.
C. Load the data in a JavaScript timeout callback.
D. Reference the remote data as an XML resource.
Correct Answer: B

QUESTION 7
You are creating a rotating image of a company logo.
The logo must spin on a horizontal axis and on a vertical axis.
You need to use the least amount of development effort to meet the requirement.
What should you do?
A. Create an Image Spinner object, load the image into the spinner, and set the horizontal and vertical rotation properties.
B. Create a Canvas Globe transform and set the image as the globe object. Set the horizontal and vertical rotation properties.
C. Create a single Canvas 3D transform and load the image into it. Set the rotation properties.
D. Create a Canvas 2D transform and set the image to rotate horizontally and vertically.
Correct Answer: C

QUESTION 8
You are developing an HTML5 web application and are styling text.
You need to use the text-transform CSS property. 70-480 dumps
Which values are valid for the text-transform property?
A. hidden
B. blink
C. capitalize
D. line-through
Correct Answer: C

QUESTION 9
You are developing an HTML5 page that includes several paragraph elements.
You have the following requirements:
– Add a drop shadow that is one inch below the text in the paragraph
– Set the radius of the drop shadow to five pixels
You need to style the paragraphs to meet the requirements.
Which CSS style should you use?
A. text-shadow: 72pt 0pt 5pt
B. text-shadow: 5px lin 0px;
C. text-shadow: 72pt 5em 0px
D. text-shadow: 72pt 0em 5px;
Correct Answer: B

QUESTION 10
You are developing a web application that consumes services from a third-party application. A web worker processes the third-party application requests in the background.
A page in the application instantiates the web worker process.
You need to establish two-way communications between the web worker process and the page.
Which two actions will achieve this goal? (Each correct answer presents a complete solution. Choose two.)
A. From the web worker, use the onconnect event handler of the main page to capture events.
B. From the main page, use the onmessage event handler of the web worker to capture events.
C. From the web worker, use the onmessage event handler of the main page to capture events.
D. From the main page, use the onconnect event handler of the web worker to capture events.
Correct Answer: B,C

The best useful Microsoft SharePoint Applications https://www.leads4pass.com/70-480.html dumps pdf training resources which are the best for clearing 70-480 exam test, and to get certified by Microsoft Microsoft SharePoint Applications.

Microsoft

[High Quality Exam Dumps] Microsoft MCSD 70-488 Dumps Exam Questions And Answers Free Shared

admin 0 Comments

High quality Microsoft MCSD 70-488 dumps exam questions and answers free download from lead4pass. Prepare for Microsoft 70-488 exam with newest Microsoft MCSD 70-488 dumps pdf resources update free shared. “Developing Microsoft SharePoint Server 2013 Core Solutions” is the name of Microsoft MCSD https://www.leads4pass.com/70-488.html exam dumps which covers all the knowledge points of the real Microsoft exam.

The best and most updated Microsoft MCSD 070-488 dumps exam practice files and study guides in PDF format shared. Latest Microsoft MCSD 070-488 dumps exam training materials update free try, pass Microsoft 070-488 exam test quickly and easily at first attempt.

High quality Microsoft 070-489 dumps pdf questions and answers: https://drive.google.com/open?id=0B_7qiYkH83VRXzA0dmNGcHJFeFk

High quality Microsoft 070-463 dumps pdf questions and answers: https://drive.google.com/open?id=0B_7qiYkH83VRUTBGZlAtQTJWN2M
070-488 dumps
QUESTION 1
You need to ensure that the CourierMobile app determines whether the franchisee owns the account.
What should you do?
A. Use OAuth and App only security. Request the Read right from the http://sharepoint/content/sitecollection/web/list scope URI.
B. Use OAuth and App+User security. Request the Read right from the http://sharepoint/content/sitecollection scope URI.
C. Use SPSecurity.RunWithElevatedPrivileges to connect to SharePoint and read from the Accounts list in the site collection.
D. Use the SharePoint user credentials of the bicycle messenger to connect to SharePoint and read from the Accounts list in the site collection.
Correct Answer: C

QUESTION 2
A franchisee deletes several sites from the franchise’s site collection. The franchisee site collection administrator must recover the sites.
You need to instruct the franchisee site collection administrator on how to access the page to recover the sites.
What should the site collection administrator do to get to the appropriate page?
A. Select General Settings for the Web Application in Central Administration and change the second stage Recycle Bin settings to 100 percent.
B. Select General Settings for the Web Application in Central Administration and change the first stage Recycle Bin settings to 0 days.
C. Select the Recycle Bin on the Site Settings page. Choose the appropriate sites and select Restore Selection.
D. Select the Recycle Bin in the Quick Launch page. Choose the appropriate sites and select Restore Selection.
Correct Answer: C

QUESTION 3
You need to ensure that the CloudManager app can write route progress check-ins to the courier’s microfeed.
What should you do? (Each correct answer presents part of the solution. Choose all that apply.)
A. Ensure that SP.RequestExecutor.js can be accessed in a browser window with no errors.
B. Ensure that the CloudManager app has the Manage permission request scoped to the URL for the franchisee’s My Site.
C. Ensure that the MySite host is provisioned for each franchisee.
D. Ensure that all cookies are made available between the My Site and the CloudManager app domain.
E. Ensure that the CloudManager app has the Write permission request scoped to the URL for the franchisee’s My Site.
F. Ensure that SP.UserProfiles.js can be accessed in a browser window with no errors.
Correct Answer: ABDE

QUESTION 4
You need to implement the custom claims provider for the SharePoint farm.
Which code segments should you implement? 70-488 dumps (Each correct answer presents part of the solution. Choose all that apply.)
070-488 dumps
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
F. Option F
Correct Answer: BDF

QUESTION 5
You need to set the appropriate permissions for the franchise employees’ customer list and customer subsite access.
What should you do?
A. Add franchise employees to the Members group in the CorporateSiteCollection site collection. Break inheritance at the franchisee subsite level. Create a custom role definition at the franchisee subsite level. Add franchise employees to the custom role.
B. Create a custom role definition in the CorporateSiteCollection site collection with Limited Access to the Customers list. Add franchise employees to the custom role at the CorporateSiteCollection site collection. Break inheritance at the subsite level. Add franchise owners to the Owners group at the subsite level.
C. Create a custom role definition in the CorporateSiteCollection site collection with Limited Access to the Customer list. Add franchise employees to the custom role. Allow full inheritance of the role definition and permissions at the site level.
D. Add franchise employees to the Visitors group in the CorporateSiteCollection site collection. Break inheritance at the franchisee subsite level. Create a custom role definition at the subsite level with Full Control permissions. Add franchise employees to the custom role.
Correct Answer: B

QUESTION 6
You need to create rules in the CourierMobile app based on the ItemType that arrives.
For which ItemTypes should you test? (Each correct answer presents part of the solution. Choose all that apply.)
A. IPM.Schedule.Meeting.Tent
B. IPM.Note
C. IPM.Schedule.Meeting.Request
D. IPM.Appointment
E. IPM.Schedule.Meeting.Cancelled
F. IPM.Schedule.Meeting.Pos
G. IPM.Schedule.Meeting.Neg
Correct Answer: DE

QUESTION 7
You need to meet the requirements for data storage for the CourierMobile app and the CloudMananger app.
Which technologies should you use? 070-488 dumps (Each correct answer presents part of the solution. Choose all that apply.)
A. Windows Azure SQL Database
B. SharePoint content database
C. Secure Store
D. SQL Server Express LocalDB
E. SharePoint list
Correct Answer: AD

QUESTION 8
You need to create a custom sign-in page to allow the users of the FranchiseMonitor app to authenticate against SharePoint and Margie’s Travel API.
What should you do?
A. Create an app for SharePoint. Set the trust level to Sandbox solution. Create an application page that writes a cookie named FedAuth. Deploy the app and configure the Sign In Page URL in Central Administration Authentication Provider for the zone.
B. Create an app for SharePoint. Set the trust level to Farm solution. Create an application page that writes a cookie named FedAuth. Deploy the app and configure the Sign In Page URL in Central Administration Authentication Provider for the zone.
C. Create an app for SharePoint. Set the trust level to Farm solution. Create an application page that writes a cookie named ASPXAUTH. Deploy the app and configure the Sign In Page URL in Central Administration Authentication Provider for the zone.
D. Create an app for SharePoint. Set the trust level to Sandbox solution. Create an application page that writes a cookie named ASPXAUTH. Deploy the app and configure the Sign In Page URL in Central Administration Authentication Provider for the zone.
Correct Answer: B

QUESTION 9
You need add to code at line IL22 to implement the task list design.
How should you complete the relevant code? (To answer, drag the appropriate code segments to the correct location or locations in the answer area. Each code segment may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)
Select and Place:
070-488 dumps
Correct Answer:
070-488 dumps
QUESTION 10
You need to configure the credential store for the app.
Which properties should you configure? 070-488 dumps (Each correct answer presents part of the solution. Choose all that apply.)
A. Pin
B. Windows Password
C. Windows User Name
D. Password
E. User Name
Correct Answer: DE

QUESTION 11
You receive an error when you deploy the app.
You need to resolve the error.
What should you do?
A. Deploy the app to http://contoso-public.sharepoint.com.
B. Enable side-loading of apps in the Visual Studio project properties.
C. Deploy the app to https://contoso-my.sharepoint.com.
D. Deploy the app to https://contoso.sharepoint.com/tasks.
Correct Answer: A

QUESTION 12
You receive an error when you deploy the app.
You need to resolve the error.
What should you do?
A. Create a deployment package and upload the app to the app catalog in SharePoint.
B. Enable side-loading of apps in the app manifest.
C. Deploy the app to https://contoso-my.sharepoint.com.
D. Enable side-loading of apps in the Visual Studio project properties.
Correct Answer: A

Hot Microsoft MCSD 070-488 dumps pdf training resources which are the best for clearing https://www.leads4pass.com/70-488.html exam test, and to get certified by Microsoft MCSD. Microsoft MCSD is the industry leader in information technology, and getting certified by them is a guaranteed way to succeed with IT careers.

Microsoft

[High Quality Exam Dumps] Latest Microsoft MCSM 70-411 Dumps PDF Files And VCE Youtube Demo Free Update

admin 0 Comments

High quality Microsoft MCSM 70-411 dumps pdf files and vce youtube demo shared free update. Get the latest Microsoft MCSM 70-411 dumps exam practice questions and answers free download from lead4pass. “Administering Windows Server 2012” is the name of Microsoft MCSM https://www.leads4pass.com/70-411.html exam dumps which covers all the knowledge points of the real Microsoft exam. The best and most update Microsoft MCSM 70-411 dumps exam training materials in PDF format free try, pass Microsoft 70-411 exam test easily.

Download free latest Microsoft 70-410 dumps pdf files: https://drive.google.com/open?id=0B_7qiYkH83VRUW1XOTI1aFZ2c2s

Download free latest Microsoft 70-413 dumps pdf files: https://drive.google.com/open?id=0B_7qiYkH83VRY1RKYlNPVUtxMWc

Vendor: Microsoft
Certifications: MCSM
Exam Name: Administering Windows Server 2012
Exam Code: 70-411
Total Questions: 234 Q&As
070-411 dumps
QUESTION 1
Your network contains four Network Policy Server (NPS) servers named Server1, Server2, Servers, and Server4.
Server1 is configured as a RADIUS proxy that forwards connection requests to a remote RADIUS server group named Group1.
You need to ensure that Server2 and Server3 receive connection requests. Server4 must only receive connection requests if both Server2 and Server3 are unavailable.
How should you configure Group1?
A. Change the Weight of Server4 to 10.
B. Change the Weight of Server2 and Server3 to 10.
C. Change the Priority of Server2 and Server3 to 10.
D. Change the Priority of Server4 to 10.
Correct Answer: D

QUESTION 2
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The domain contains 500 client computers that run Windows 8 Enterprise.
You implement a Group Policy central store.
You have an application named App1. App1 requires that a custom registry setting be deployed to all of the computers.
You need to deploy the custom registry setting. The solution must minimize administrator effort.
What should you configure in a Group Policy object (GPO)?
A. The Software Installation settings
B. The Administrative Templates
C. An application control policy
D. The Group Policy preferences
Correct Answer: D

QUESTION 3
Your network contains two Active Directory forests named contoso.com and dev.contoso.com. The contoso.com forest contains a domain controller named DC1. 70-411 dumps The dev.contoso.com forest contains a domain controller named DC2. Each domain contains an organizational unit (OU) named OU1.
Dev.contoso.com has a Group Policy object (GPO) named GPO1. GPO1 contains 200 settings, including several settings that have network paths. GPO1 is linked to OU1.
You need to copy GPO1 from dev.contoso.com to contoso.com.
What should you do first on DC2?
A. From the Group Policy Management console, right-click GPO1 and select Copy.
B. Run the mtedit.exe command and specify the /Domaintcontoso.com /DC: DC 1 parameter.
C. Run the Save-NetGpocmdlet.
D. Run the Backup-Gpocmdlet.
Correct Answer: A

QUESTION 4
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.
The domain contains a server named Server1 that has the Network Policy Server server role and the Remote Access server role installed. The domain contains a server named Server2 that is configured as a RADIUS server.
Server1 provides VPN access to external users.
You need to ensure that all of the VPN connections to Server1 are logged to the RADIUS server on Server2.
What should you run?
A. Add-RemoteAccessRadius -ServerNameServer1 -AccountingOnOffMsg Enabled – SharedSecret “Secret” -Purpose Accounting
B. Set-RemoteAccessAccounting -AccountingOnOffMsg Enabled -AccountingOnOffMsg Enabled
C. Add-RemoteAccessRadius -ServerName Server2 -AccountingOnOffMsg Enabled – SharedSecret “Secret” -Purpose Accounting
D. Set-RemoteAccessAccounting -EnableAccountingType Inbox -AccountingOnOffMsg Enabled
Correct Answer: C

QUESTION 5
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
Server1 has the following role services installed:
– DirectAccess and VPN (RRAS)
– Network Policy Server
Remote users have client computers that run either Windows XP, Windows 7, or Windows 8.
You need to ensure that only the client computers that run Windows 7 or Windows 8 can establish VPN connections to Server1.
What should you configure on Server1?
A. A condition of a Network Policy Server (NPS) network policy
B. A constraint of a Network Policy Server (NPS) network policy
C. a condition of a Network Policy Server (NPS) connection request policy
D. A vendor-specific RADIUS attribute of a Network Policy Server (NPS) connection request policy
Correct Answer: A

QUESTION 6
Your network contains an Active Directory forest named contoso.com. The forest contains a Network Policy Server (NPS) server named NPS1 and a VPN server named VPN1.
VPN1 forwards all authentication requests to NPS1.
A partner company has an Active Directory forest named adatum.com. The adatum.com forest contains an NPS server named NPS2.
You plan to grant users from adatum.com VPN access to your network.
You need to authenticate the users from adatum.com on VPN1.
What should you create on each NPS server?
To answer, drag the appropriate objects to the correct NPS servers. 70-411 dumps Each object may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
070-411 dumps
Correct Answer:
070-411 dumps
QUESTION 7
You are a network administrator of an Active Directory domain named contoso.com.
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the DHCP Server server role and the Network Policy Server role service installed.
You enable Network Access Protection (NAP) on all of the DHCP scopes on Server1.
You need to create a DHCP policy that will apply to all of the NAP non-compliant DHCP clients.
Which criteria should you specify when you create the DHCP policy?
A. The client identifier
B. The user class
C. The vendor class
D. The relay agent information
Correct Answer: B

QUESTION 8
You have Windows Server 2012 R2 installation media that contains a file named Install.wim. You need to identify the permissions of the mounted images in Install.wim.
What should you do?
A. Run dism.exe and specify the /get-mountedwiminfo parameter.
B. Run imagex.exe and specify the /verify parameter.
C. Run imagex.exe and specify the /ref parameter.
D. Run dism.exe and specify the/get-imageinfo parameter.
Correct Answer: A

QUESTION 9
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.
Client computers run either Windows 7 or Windows 8. All of the client computers have an application named App1 installed.
The domain contains a Group Policy object (GPO) named GPO1 that is applied to all of the client computers.
You need to add a system variable named App1Data to all of the client computers.
Which Group Policy preference should you configure?
A. Environment
B. Ini Files
C. Data Sources
D. Services
Correct Answer: A

QUESTION 10
A network administrator creates a Group Policy central store.
After the central store is created, you discover that when you create new Group Policy objects (GPOs), the GPOs do not contain any Administrative Templates.
You need to ensure that the Administrative Templates appear in new GPOs.
What should you do?
A. Add your user account to the Group Policy Creator Owners group.
B. Configure all domain controllers as global catalog servers.
C. Copy files from %Windir%\Policydefimtions to the central store.
D. Modify the Delegation settings of the new GPOs.
Correct Answer: C

QUESTION 11
Your network contains an Active Directory domain named contoso.com.
All user accounts reside in an organizational unit (OU) named OU1.
You create a Group Policy object (GPO) named GPO1. 70-411 dumps You link GPO1 to OU1. You configure the Group Policy preference of GPO1 to add a shortcut named Link1 to the desktop of each user.
You discover that when a user deletes Link1, the shortcut is removed permanently from the desktop.
You need to ensure that if a user deletes Link1, the shortcut is added to the desktop again.
What should you do?
A. Enforce GPO1.
B. Modify the Link1 shortcut preference of GPO1.
C. Enable loopback processing in GPO1.
D. Modify the Security Filtering settings of GPO1.
Correct Answer: B

QUESTION 12
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the Network Policy Server role service installed.
An administrator creates a RADIUS client template named Template1.
You create a RADIUS client named Client1 by using Template 1.
You need to modify the shared secret for Client1.
What should you do first?
A. Configure the Advanced settings of Template1.
B. Set the Shared secret setting of Template1 to Manual.
C. Clear Enable this RADIUS client for Client1.
D. Clear Select an existing template for Client1.
Correct Answer: D

Read more: https://www.leads4pass.com/70-411.html dumps pdf practice questions and answers free update, shared the latest Microsoft MCSM 070-411 dumps exam training materials and study guides free try, 100% success and guarantee to pass!

Microsoft

[High Quality Exam Dumps] Update Latest Microsoft 70-764 Dumps Exam Questions And Answers Youtube Free Try

admin 0 Comments

Get the latest Microsoft MCSA 70-764 dumps exam questions and answers free update from lead4pass. High quality Microsoft MCSA 70-764 dumps pdf files and dumps vce youtube demo. “Administering a SQL Database Infrastructure” is the name of Microsoft MCSA https://www.leads4pass.com/70-764.html exam dumps which covers all the knowledge points of the real Microsoft exam. The best Microsoft MCSA 70-764 dumps pdf training materials and study guides update free try, pass Microsoft 70-764 exam test easily.

Latest Microsoft 70-764 dumps pdf questions and answers free download: https://drive.google.com/open?id=0B_7qiYkH83VRQkJlUzA0aEpMN3c

Latest Microsoft 70-765 dumps pdf questions and answers free download: https://drive.google.com/open?id=0B_7qiYkH83VRSzdtSnprR090aVk

Vendor: Microsoft
Certifications: MCSA
Exam Name: Administering a SQL Database Infrastructure
Exam Code: 70-764
Total Questions: 119 Q&As
70-764 dumps
QUESTION 1
You manage a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) deployment. The deployment contains a reporting services point.
You subscribe to all client status reports.
You need to subscribe to an Asset Intelligence report.
From where should you configure the subscription?
A. Reporting Services Configuration Manager
B. the Report Server Web service site
C. the Monitoring workspace from the Configuration Manager Console
D. SQL Server Configuration Manager
Correct Answer: A

QUESTION 2
Your network contains a single Active Directory domain named contoso.com.
System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) is deployed to contoso.com.
You need to inventory the installed software on Windows Phone and iOS devices.
What should you do first?
A. Configure Software Inventory.
B. Add a Microsoft Intune subscription.
C. Configure Network Discovery.
D. Install the Configuration Manager client.
E. Enroll the mobile devices.
Correct Answer: A

QUESTION 3
You are planning the implementation of two new servers that will be configured as RADIUS servers.
You need to recommend which configuration must be performed on the VPN servers. 70-764 dumps The solution must meet the technical requirements.
What should you do on each VPN server?
A. Add a RADIUS client.
B. Install the Health Registration Authority role service.
C. Enable DirectAccess.
D. Modify the authentication provider.
Correct Answer: D

QUESTION 4
Your network contains a System Center 2012 Configuration Manager environment.
You need to receive an email message every day that lists all non-compliant clients.
What should you do?
A. Create an alert subscription.
B. Configure a Microsoft SQL Server Reporting Services (SSRS) report.
C. Configure an in-console alert.
D. Create a ConfigMgr query.
Correct Answer: B

QUESTION 5
You need to recommend a fault-tolerant solution for the VPN. The solution must meet the technical requirements.
What should you include in the recommendation?
A. Network adapter teaming
B. Network Load Balancing (NLB)
C. Failover Clustering
D. DirectAccess
Correct Answer: B

QUESTION 6
Your network contains a System Center 2012 Configuration Manager environment.
You need to change the organization name displayed by Configuration Manager.
Which settings should you modify from the Configuration Manager console?
A. Client Policy
B. Computer Agent
C. User and Device Affinity
D. Compliance Settings
Correct Answer: B

QUESTION 7
Your company has an Office 365 Small Business subscription. You are the Microsoft SharePoint Online administrator.
The company wants to have two separate public websites with different URLs. 70-764 dumps
You need to configure the environment to support the public websites.
What should you do?
A. Upgrade to SharePoint Online for Office 365 Enterprise, Education, and Government.
B. Create one public website and one subsite, and then configure a redirect.
C. Create two public websites and configure the DNS records for each site.
D. Upgrade to SharePoint Online for Office 365 Midsize Business.
Correct Answer: B

QUESTION 8
You need to implement the technical requirements for the boston.litwareinc.com domain.
Which tools should you use?
A. Gpfixup and Gpupdate
B. Rendom and Gpfixup
C. Gpupdate and Dcgpofix
D. Adprep and Rendom
Correct Answer: B

QUESTION 9
Your network contains a System Center 2012 Configuration Manager environment.
The environment contains a reporting services point.
You need to identify which tools can be used to create and publish custom reports to Microsoft SQL Server Reporting Services (SSRS).
Which tool should you identify?
A. Reporting Services Configuration Manager
B. Microsoft SQL Server Management Studio
C. Microsoft SQL Server Business Intelligence Development Studio
D. Microsoft Access 2010 and Reporting Services Configuration Manager
Correct Answer: C

QUESTION 10
You need to ensure that NAP meets the technical requirements.
Which role services should you install?
A. Network Policy Server, Health Registration Authority and Host Credential Authorization Protocol
B. Health Registration Authority, Host Credential Authorization Protocol and Online Responder
C. Certification Authority, Network Policy Server and Health Registration Authority
D. Online Responder, Certification Authority and Network Policy Server
Correct Answer: C

QUESTION 11
Your network contains a System Center 2012 Configuration Manager environment.
The hierarchy contains a Central Administration Site named Site1 and a primary site named Site2.
You discover that none of the packages created on Site1 are displayed in Site2. 70-764 dumps
You need to identify whether there is a replication issue between the sites.
What should you review?
A. the Inventoryagent.log file
B. the Rcmctrl.log file
C. the Microsoft SQL Server replication diagnostic files
D. the Despool.log file
Correct Answer: B

QUESTION 12
Your company uses System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) to distribute operating system images. The standard operating system for client computers is Windows 8.1 Enterprise (x86).
You receive 300 new desktop computers. Each computer has a new storage controller.
When you attempt to deploy an existing image to one of the computers, you receive an error message indicating that a storage device cannot be found during the pre-boot deployment phase.
You need to ensure that you can deploy Windows 8.1 to the new computers by using an image.
What should you do?
A. Import the storage drivers to the Drivers container and update the task sequence.
B. Update the existing x86 boot image to include the storage drivers.
C. Create a new driver package and update the task sequence.
D. Create a new x64 boot image and configure the operating system image to use the x64 boot image.
Correct Answer: B

Reference: https://www.leads4pass.com/70-764.html dumps exam training resources and study guides free update.

Watch the video to learn more: https://youtu.be/0QyhoEre65o

Microsoft

[High Quality Exam Dumps] Latest Microsoft 70-347 Dumps PDF Training Resources And VCE Youtube Update Demo

admin 0 Comments

Lead4pass offers latest Microsoft Office 365 70-347 dumps pdf training resources and study guides free download. High quality Microsoft Office 365 70-347 dumps pdf files and vce youtube demo. https://www.leads4pass.com/70-347.html dumps exam practice materials. Update the best Microsoft Office 365 70-347 dumps exam questions and answers free try, pass Microsoft 70-347 exam test easily.

Latest Microsoft 070-347 dumps pdf training resources free download: https://drive.google.com/open?id=0B_7qiYkH83VRQWM5MnpnU1IzZlU

Latest Microsoft 070-463 dumps pdf training resources free download: https://drive.google.com/open?id=0B_7qiYkH83VRUTBGZlAtQTJWN2M

Vendor: Microsoft
Certifications: Microsoft Office 365
Exam Name: Enabling Office 365 Services
Exam Code: 70-347
Total Questions: 219 Q&As
070-347 dumps
QUESTION 1
You are the Microsoft Lync administrator for a company that uses Lync Online. The company has mandated that employees may use Lync Online to communicate with contacts from approved external domains. You need to configure Lync Online to allow Lync federation with only three specific domains.
You must achieve this goal by using the least amount of administrative effort.
Which two actions should you perform? Each correct answer presents part of the solution.
A. In the Lync admin center, set the External Access option to On except for blocked domains.
B. In the Office 365 admin center, add the three domains to the domain list and set the domain intent for each domain to Lync Online.
C. In the Lync admin center, set the External Access option to Off completely.
D. In the Lync admin center, set the External Access option to On only for allowed domains.
E. In the Lync admin center, configure the Presence Privacy Mode option to display presence information only to the users’ contacts.
F. In the Lync admin center, add the three domains to the Blocked Or Allowed Domains list.
Correct Answer: D, F

QUESTION 2
Your company is planning to migrate to Microsoft Exchange Online. The company employs 5,000 people, each with a mailbox currently located on Exchange Server 2000.
The company has the following migration requirements:
– Move mailboxes in batches.
– Do not migrate calendar or contact items.
– Provide migration status reports to administrators.
You need to select the appropriate migration strategy.
Which migration strategy should you use?
A. Staged migration
B. Cutover migration
C. IMAP migration
D. Hybrid migration
Correct Answer: C

QUESTION 3
You are the Office 365 administrator for your company. Executive employees have been assigned E3 licenses. Non-executive employees have been assigned El licenses. 070-347 dumps An employee who is not on the executive team wants to communicate with executive team members by using Microsoft Lync instant messaging.
You need to ensure that the employee can use Lync.
What should you do?
A. Sign in to the Office 365 portal and use Office on Demand.
B. Sign in to the Office 365 portal and then run the Office 365 Desktop Setup.
C. Sign in to the Office 365 portal and then download and install Office 365 ProPlus.
D. Sign in to the Office 365 portal and then download and install the Lync Basic desktop client.
Correct Answer: D

QUESTION 4
Your company has an Office 365 Enterprise El subscription. The company wants to implement an enterprise document collaboration and social networking platform that allows users to upload documents from their computers and conduct informal polls. You need to implement a solution that meets the requirements.
Which solution should you implement?
A. Microsoft SharePoint document libraries
B. Microsoft SharePoint surveys
C. Microsoft Yammer
D. Microsoft SharePoint newsfeeds
E. Microsoft SkyDrive Pro
Correct Answer: C

QUESTION 5
Your company has an Office 365 Small Business subscription. You are the Microsoft SharePoint Online administrator. The company wants to have two separate public websites with different URLs. You need to configure the environment to support the public websites.
What should you do?
A. Upgrade to SharePoint Online for Office 365 Enterprise, Education, and Government.
B. Create one public website and one subsite, and then configure a redirect.
C. Create two public websites and configure the DNS records for each site.
D. Upgrade to SharePoint Online for Office 365 Midsize Business.
Correct Answer: B

QUESTION 6
You are the Office 365 administrator for your company’s Microsoft Exchange Online environment. The company recently subscribed to the Office 365 Enterprise El plan.
The company wants to filter email messages based on the following criteria:
– Reverse DNS lookup
– Sender open proxy test
– HELO/EHLO analysis
– Analysis of spam confidence level (SCL) ratings on email messages from a specific sender
You need to filter all email messages.
How should you complete the relevant Windows PowerShell script? To answer, select the appropriate command segment from each list in the answer area.
070-347 dumps
070-347 dumps
Correct Answer:
070-347 dumps
QUESTION 7
Your company uses Office 365 and has an Enterprise E3 plan. The company has a Microsoft SharePoint Online public website that is currently configured to use the onmicrosoft.com domain name. 70-347 dumps
The company purchases a new domain name. You need to change the address of the SharePoint Online public website to the new domain name.
What should you do first?
A. In the SharePoint Online Administration Center, add the new domain.
B. In the Office 365 admin center, add the new domain.
C. Create a new site collection and assign it the new domain.
D. Create a new public website and assign it to the new domain.
Correct Answer: B

QUESTION 8
You are the Office 365 administrator for your company. All users have been assigned E3 licenses and use Office Web Apps to create and edit documents. A user attempts to access documents stored on a USB flash drive. When the user double-clicks a file that is stored on the USB flash drive, an error message states that Windows can’t open the file and needs to know what program to use to open it. You need to ensure that the user can start Office applications and edit Office documents by double-clicking files.
What should you do on the user’s computer?
A. Use Office on Demand.
B. Install Office 365 ProPlus from the Office 365 portal.
C. Copy the files from the USB flash drive to the local hard drive.
D. Install and configure Microsoft Word Viewer.
Correct Answer: B

QUESTION 9
Your company uses Microsoft SharePoint Online for collaboration.
A document library is configured as shown in the following table.
070-347 dumps
You need to enable the coauthoring of documents in the library.
What should you do?
A. Change the Who should see draft items in this document library? setting to Any user who can read items.
B. Change the Create a version each time you edit a file in this document library? setting to No Versioning.
C. Change the Require documents to be checked out before they can be edited? setting to No.
D. Change the Require content approval for submitted items? setting to No.
Correct Answer: C

QUESTION 10
Your company plans to use Office 365 and Microsoft SharePoint Online. Another employee provisions the company’s Office 365 tenant. You discover that the employee can create and manage SharePoint site collections. You need to prevent the employee from creating or managing site collections.
From which role should you remove the employee?
A. Service administrator
B. SharePoint Online administrator
C. Global administrator
D. Site collection administrator
Correct Answer: C

QUESTION 11
Your company is planning to migrate to Microsoft Exchange Online. The company employs 1,000 people, each with a mailbox currently located on Exchange 2010 on-premises. 70-347 dumps You estimate that it will take a minimum of four weeks to migrate all mailboxes from on-premises Exchange to Exchange Online.
The company has the following migration requirements:
– During the migration, do not change the existing Microsoft Outlook profiles and .ost files used by the employees.
– Ensure that email messages sent between on-premises mailboxes and online mailboxes during the migration are secure.
– Do not send email messages between on-premises mailboxes and online mailboxes over the Internet in plain text.
You need to select the migration strategy that meets the requirements.
Which migration strategy should you use?
A. Cutover migration only
B. IMAP migration only
C. Remote move migration only
D. Staged migration only
Correct Answer: C

QUESTION 12
You are the Office 365 administrator for your company.
The company has established the following new requirements:
– Members of the legal team must be able to conduct eDiscovery searches.
– Employees must be notified when they send email messages that contain confidential information.
You need to configure the environment.
Which two actions should you perform? Each correct answer presents part of the solution.
A. Configure journaling to a Microsoft Exchange Online mailbox for all mailboxes.
B. Add the members of the legal team to the Discovery Management role group.
C. Create a Data Loss Prevention policy.
D. Place all executive mailboxes on In-Place Hold for 365 days and use In-Place eDiscovery for mailbox searches.
E. Enable Microsoft Exchange Online Archiving for the executive mailboxes.
F. Place all executive mailboxes on Retention Hold.
Correct Answer: B, C

Reference: https://www.leads4pass.com/70-347.html dumps exam practice materials and study guides free update.

Watch the video to learn more: https://youtu.be/ECluu_C45eo

Microsoft

[High Quality Exam Dumps] Latest 70-461 Dumps Microsoft Exam Practice Files And Youtube

admin 0 Comments

Prepare for Microsoft 070-461 exam test with latest Microsoft Business Intelligence 070-461 dumps exam practice files and study guides. High quality Microsoft Business Intelligence 70-461 dumps pdf materials and dumps vce youtube demo. https://www.leads4pass.com/70-461.html dumps pdf training resources. Latest Microsoft Business Intelligence 070-461 dumps exam questions and answers update free try, pass Microsoft 070-461 exam test easily.

Latest Microsoft 070-461 dumps pdf practice files free download: https://drive.google.com/open?id=0B_7qiYkH83VRMDlXX3pPNWpnQWM

Latest Microsoft 070-489 dumps pdf practice files free download: https://drive.google.com/open?id=0B_7qiYkH83VRXzA0dmNGcHJFeFk

Vendor: Microsoft
Certifications: Microsoft Business Intelligence
Exam Name: Querying Microsoft SQL Server 2012
Exam Code: 070-461
Total Questions: 164 Q&As
070-461 dumps
QUESTION 1
You develop a Microsoft SQL Server 2012 database. The database is used by two web applications that access a table named Products.
You want to create an object that will prevent the applications from accessing the table directly while still providing access to the required data.
You need to ensure that the following requirements are met:
Future modifications to the table definition will not affect the applications’ ability to access data.
The new object can accommodate data retrieval and data modification.
You need to achieve this goal by using the minimum amount of changes to the existing applications.
What should you create for each application?
A. views
B. table partitions
C. table-valued functions
D. stored procedures
Correct Answer: A

QUESTION 2
You administer a Microsoft SQL Server 2012 database that contains a table named OrderDetail. You discover that the NCI_OrderDetail_CustomerID non-clustered index is fragmented. 70-461 dumps You need to reduce fragmentation.
You need to achieve this goal without taking the index offline. Which Transact-SQL batch should you use?
A. CREATE INDEX NCI_OrderDetail_CustomerID ON OrderDetail.CustomerID WITH
DROP
EXISTING
B. ALTER INDEX NCI_OrderDetail_CustomerID ON OrderDetail.CustomerID
REORGANIZE
C. ALTER INDEX ALL ON OrderDetail REBUILD
D. ALTER INDEX NCI_OrderDetail_CustomerID ON OrderDetail.CustomerID REBUILD
Correct Answer: B

QUESTION 3
You develop a database for a travel application. You need to design tables and other database objects.
You create the Airline_Schedules table.
You need to store the departure and arrival dates and times of flights along with time zone information.
What should you do?
A. Use the CAST function.
B. Use the DATE data type.
C. Use the FORMAT function.
D. Use an appropriate collation.
E. Use a user-defined table type.
F. Use the VARBINARY data type.
G. Use the DATETIME data type.
H. Use the DATETIME2 data type.
I. Use the DATETIMEOFFSET data type.
J. Use the TODATETIMEOFFSET function.
Correct Answer: I

QUESTION 4
You are a database developer at an independent software vendor. You create stored procedures that contain proprietary code.
You need to protect the code from being viewed by your customers.
Which stored procedure option should you use?
A. ENCRYPTBYKEY
B. ENCRYPTION
C. ENCRYPTBYPASSPHRASE
D. ENCRYPTBYCERT
Correct Answer: B

QUESTION 5
You develop a Microsoft SQL Server 2012 database.
You need to create a batch process that meets the following requirements:
Returns a result set based on supplied parameters.
Enables the returned result set to perform a join with a table.
Which object should you use?
A. Inline user-defined function
B. Stored procedure
C. Table-valued user-defined function
D. Scalar user-defined function
Correct Answer: C

QUESTION 6
You develop a Microsoft SQL Server 2012 database. You create a view from the Orders and OrderDetails tables by using the following definition. 70-461 dumps
070-461 dumps
You need to improve the performance of the view by persisting data to disk. What should you do?
A. Create an INSTEAD OF trigger on the view.
B. Create an AFTER trigger on the view.
C. Modify the view to use the WITH VIEW_METADATA clause.
D. Create a clustered index on the view.
Correct Answer: D

QUESTION 7
You develop a database for a travel application. You need to design tables and other database objects. You create a stored procedure. You need to supply the stored procedure with multiple event names and their dates as parameters. What should you do?
A. Use the CAST function.
B. Use the DATE data type.
C. Use the FORMAT function.
D. Use an appropriate collation.
E. Use a user-defined table type.
F. Use the VARBINARY data type.
G. Use the DATETIME data type.
H. Use the DATETIME2 data type.
I. Use the DATETIMEOFFSET data type.
J. Use the TODATETIMEOFFSET function.
Correct Answer: E

QUESTION 8
You have a Microsoft SQL Server 2012 database that contains tables named Customers and Orders.
The tables are related by a column named CustomerID.
You need to create a query that meets the following requirements:
Returns the CustomerName for all customers and the OrderDate for any orders that they have placed.
Results must include customers who have not placed any orders.
Which Transact-SQL query should you use?
A. SELECT CustomerName, OrderDate
FROM Customers
RIGHT OUTER JOIN Orders
ON Customers.CustomerID = Orders.CustomerID
B. SELECT CustomerName, CrderDate
FROM Customers
JOIN Orders
ON Customers.CustomerID = Orders.CustomerID
C. SELECT CustomerName, OrderDate
FROM Customers
CROSS JOIN Orders
ON Customers.CustomerID = Orders.CustomerID
D. SELECT CustomerName, OrderDate
FROM Customers
LEFT OUTER JOIN Orders
ON Customers.CustomerID = Orders.CustomerID
Correct Answer: D

QUESTION 9
You create a stored procedure that will update multiple tables within a transaction.
You need to ensure that if the stored procedure raises a run-time error, the entire transaction is terminated and rolled back.
Which Transact-SQL statement should you include at the beginning of the stored procedure?
A. SET XACT_ABORT ON
B. SET ARITHABORT ON
C. TRY
D. BEGIN
E. SET ARITHABORT OFF
F. SET XACT_ABORT OFF
Correct Answer: A

QUESTION 10
Your database contains two tables named DomesticSalesOrders and InternationalSalesOrders. Both tables contain more than 100 million rows. Each table has a Primary Key column named SalesOrderId. The data in the two tables is distinct from one another. 70-461 dumps
Business users want a report that includes aggregate information about the total number of global sales and total sales amounts.
You need to ensure that your query executes in the minimum possible time.
Which query should you use?
A. SELECT COUNT(*) AS NumberOfSales, SUM(SalesAmount) AS TotalSalesAmount FROM (
SELECT SalesOrderId, SalesAmount
FROM DomesticSalesOrders
UNION ALL
SELECT SalesOrderId, SalesAmount
FROM InternationalSalesOrders
) AS p
B. SELECT COUNT(*) AS NumberOfSales, SUM(SalesAmount) AS TotalSalesAmount FROM (
SELECT SalesOrderId, SalesAmount
FROM DomesticSalesOrders
UNION
SELECT SalesOrderId, SalesAmount
FROM InternationalSalesOrders
) AS p
C. SELECT COUNT(*) AS NumberOfSales, SUM(SalesAmount) AS TotalSalesAmount FROM DomesticSalesOrders
UNION
SELECT COUNT(*) AS NumberOfSales, SUM(SalesAmount) AS TotalSalesAmount
FROM InternationalSalesOrders
D. SELECT COUNT(*) AS NumberOfSales, SUM(SalesAmount) AS TotalSalesAmount FROM DomesticSalesOrders
UNION ALL
SELECT COUNT(*) AS NumberOfSales, SUM(SalesAmount) AS TotalSalesAmount FROM InternationalSalesOrders
Correct Answer: A

Read more: https://www.leads4pass.com/70-461.html dumps exam training materials free update.

Watch the video to learn more: https://youtu.be/2GmNF3FXYok

Microsoft

[High Quality Exam Dumps] Update Latest Microsoft 70-410 Dumps PDF Materials, Best 70-410 Dumps Youtube Free Try

admin 0 Comments

High quality latest Microsoft MCSA 70-410 dumps pdf training materials and study guides download free try from lead4pass. The best Microsoft MCSA 70-410 dumps pdf practice files and dumps vce youtube demo. https://www.leads4pass.com/70-410.html dumps exam training resources. Latest Microsoft MCSA 70-410 dumps exam questions and answers, pass Microsoft 70-410 exam test easily at first attempt.

High quality latest Microsoft 70-410 dumps pdf files: https://drive.google.com/open?id=0B_7qiYkH83VRTEVjQ2cxZVF5RGs

High quality latest Microsoft 70-331 dumps pdf files: https://drive.google.com/open?id=0B_7qiYkH83VRUDhBczM0RWRXQnM

Vendor: Microsoft
Certifications: MCSA
Exam Name: Installing and Configuring Windows Server 2012
Exam Code: 70-410
Total Questions: 503 Q&As
70-410 dumps
QUESTION 1
You are helping your Partner Sales Representatives understand what marketing tools are available to help them acquire new accounts.Which two weapons/resources can you direct them to for account acquisition? (Choose two)
A.Cisco Partner Marketing Demand Generation tools like “Go -Generating Opportunities”
B.Vertical Handbooks
C.Cisco Partner Marketing Central
D.Smart Business Roadmaps
Correct Answer: A,C

QUESTION 2
Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8.
You deploy a server named Server1 that runs Windows Server 2012 R2. You install a new client-server application named App1 on Server1 and on the client computers.
The client computers must use TCP port 6444 to connect to App1 on Server1. Server1 publishes the information of App1 to an intranet server named Server2 by using TCP port 3080. You need to ensure that all of the client computers can connect to App1. The solution must ensure that the application can connect to Server2.
Which Windows Firewall rule should you create on Server1?
A. an inbound rule to allow a connection to TCP port 3080
B. an outbound rule to allow a connection to TCP port 3080
C. an outbound rule to allow a connection to TCP port 6444
D. an inbound rule to allow a connection to TCP port 6444
Correct Answer: D

QUESTION 3
Which two statements about how to determine if a project return on investment is acceptable to your customer are true? (Choose two) 70-410 dumps
A.Compare the Internal Rate of Return of the project against the customer Internal Rate of Return
B.The customer agrees that the identified solution meets their business requirements
C.Check that our Return on Investment is better than that of the competition.
D.It is too complex to assess a project return on investment
Correct Answer: A,C

QUESTION 4
At which stage of the sales process should you offer a demo of Cisco solutions?
A.Prospecting
B.Qualifying
C.Proposing
D.Agreement
E.Closing
Correct Answer: B

QUESTION 5
Your network contains an active directory domain named contoso.com. The domain contains a domain controller named DCS. DCS has a server core installation of windows server 2012. You need to uninstall Active Directory from DCS manually. Which tool should you use?
A. The Remove-WindowsFeature cmdlet
B. the dsamain.exe command
C. the ntdsutil.exe command
D. the Remove-ADComputer cmdlet
Correct Answer: C

QUESTION 6
What is Value Based Negotiation?
A.Negotiating based on price
B.Negotiating based on the competition price
C.Negotiating around the value the solution will deliver
D.Negotiating with Senior Management within the client
Correct Answer: C
70-410 dumps
QUESTION 7
How many distinct stages are in the typical selling process? 70-410 dumps
A.4
B.5
C.6
D.7
E.8
Correct Answer: B

QUESTION 8
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that hosts the primary DNS zone for contoso.com. All client computers are configured to use DC1 as the primary DNS server. You need to configure DC1 to resolve any DNS requests that are not for the contoso.com zone by querying the DNS server of your Internet Service Provider (ISP).
What should you configure?
A. Name server (NS) records
B. Condition& forwarders
C. Forwarders
D. Naming Authority Pointer (NAPTR) DNS resource records (RR)
Correct Answer: C

QUESTION 9
You have a server named Core1 that has a Server Core Installation of Windows Server 2012 R2. Core1 has the Hyper-V server role installed Core1 has two network adapters from different third- party hardware vendors.
You need to configure network traffic failover to prevent connectivity loss if a network adapter fails.
What should you use?
A. New-NetSwitchTeam
B. Add-NetSwitchTeamMember
C. Install-Feature
D. netsh.exe
Correct Answer: A

QUESTION 10
You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers in the ABC.com domain, 70-410 dumps including domain controllers, have Windows Server 2012 R2 installed. ABC.com’s user accounts are located in an organizational unit (OU), named ABCStaff.
ABC.com’s managersbelong to a group, named ABCManagers. You have been instructed to create a new Group Policy object (GPO) that should be linked to the ABCStaffOU, but not affect ABC.com’s managers.
Which of the following actions should you take?
A. You should consider removing the user accounts of the managers from the ABCStaff OU.
B. You should consider configuring the new GPO’s WMI filter.
C. You should consider adding the user accounts of ABC.com’s managers to the Admins group.
D. You should consider adding the user accounts of ABC.com’s managers to the localAdministrators group.
Correct Answer: B

Reference: https://www.leads4pass.com/70-410.html dumps exam questions and answers update.

Watch the video to learn more: https://youtu.be/AMGz_Z6EdgU

Microsoft

[High Quality Exam Dumps] Latest Microsoft 70-696 Dumps PDF Practice Files, Best 70-696 Dumps VCE Youtube

admin 0 Comments

High quality latest Microsoft 70-696 dumps pdf practice files and study guides download free try from lead4pass. The best Microsoft 70-696 dumps vce youtube free demo. https://www.leads4pass.com/70-696.html dumps pdf training resources update. Latest Microsoft 70-696 dumps exam questions and answers, get the best Microsoft 70-696 dumps training materials from lead4pass, pass Microsoft 70-696 exam test easily at first attempt.

High quality Microsoft 70-696 dumps pdf practice files: https://drive.google.com/open?id=0B_7qiYkH83VRU3NnY0p0MHljbDg

High quality Microsoft 70-486 dumps pdf practice files: https://drive.google.com/open?id=0B_7qiYkH83VRMDRTbjBZUUNoUmc

Vendor: Microsoft
Certifications: MCSE: Enterprise Devices and Apps
Exam Name: Managing Enterprise Devices and Apps
Exam Code: 70-696
Total Questions: 86 Q&As
70-696 dumps
QUESTION 1
Your network includes Windows Server 2008 R2 Hyper-V servers. Each Hyper-V server runs multiple virtual machines (VMs). You need to detect performance issues and generate an alert when Hyper-V server load exceeds specific thresholds. Which tool should you use?
A. Microsoft System Center Capacity Planner 2007
B. Microsoft System Center Operations Manager 2007 R2
C. Microsoft System Center Configuration Manager 2007 R2
D. Microsoft System Center Virtual Machine Manager 2008 R2
Correct Answer: B

QUESTION 2
You need to ensure that the personal devices that run Windows 8.1 meet the corporate security policy requirements. 70-696 pdf What should you do first?
A. Create a federated trust with Windows Azure Active Directory.
B. Create a federated identity relationship with the Microsoft Federation Gateway.
C. Enroll the device in Windows Intune.
D. Join the devices to the domain by using an offline domain join.
Correct Answer: C

QUESTION 3
You are designing a Windows Server 2008 R2 Hyper-V environment. You need to be able to dynamically add new storage to Windows virtual machines (VMs). 70-696 dumps What should you do?
A. Use fixed virtual hard disks (VHDs).
B. Install Hyper-V Integration Services on the VMs.
C. Install the VMs in Cluster Shared Volumes (CSVs).
D. Use dynamically expanding virtual hard disks (VHDs).
Correct Answer: B

QUESTION 4
You are designing a Hyper-V solution. You plan to virtualize an application server. The application server requires failover clustering that uses shared storage. You need to choose the correct storage solution. What should you choose?
A. two child partitions with VHDs stored on an iSCSI SAN
B. two child partitions with volumes mounted from an iSCSI SAN
C. two host servers with iSCSI-attached storage enabled for Cluster Shared Volumes (CSVs)
D. two host servers with Fibre Channelattached storage enabled for Cluster Shared Volumes (CSVs)
Correct Answer: B

QUESTION 5
You need to meet the application requirements of App4.
What should you do first?
A. Create a Mobile Device Security Policy.
B. Upload App4 to Windows Intune.
C. Set the Mobile Devices Management Authority.
D. Install the Windows Intune client software.
Correct Answer: C

QUESTION 6
You have a deployment of Microsoft System Center 2012 R2 Configuration Manager that contains the objects shown in the following table.
70-696 dumps
You are creating a new configuration baseline.
You need to identify which objects you can use as evaluation conditions within the new configuration baseline.
Which three objects should you identify? Each correct answer presents part of the solution.
A. Object1
B. Object2
C. Object3
D. Object4
E. Object5
Correct Answer: BCE

QUESTION 7
You need to prepare Server11. 70-696 pdf
Which two actions should you perform? Each correct answer presents part of the solution.
A. Create a file named No_sms_on_drive in the root of drive C.
B. From the Add Site System Roles Wizard, set the primary package share location to Automatic.
C. From the Add Site System Roles Wizard, set the primary content location to E.
D. From the Add Site System Roles Wizard, set the primary package share location to E.
E. Copy Prepdrv.inf to the root of drive C.
Correct Answer: AB

QUESTION 8
You need to resolve the Windows update issue.
What should you do?
A. Modify the Group Policy objects (GPOs) in Active Directory.
B. Synchronize software updates from Configuration Manager.
C. Create an automatic deployment rule.
D. Add distribution points to each branch office.
Correct Answer: D

QUESTION 9
You are planning to deploy two Windows Server 2008 R2 Hyper-V servers. You need to design the storage of VHD files for maximum security. 70-696 dumps What should you do?
A. Store the VHD files on a dedicated NTFS volume.
B. Store unencrypted VHD files on a volume that uses Windows BitLocker drive encryption.
C. Store unencrypted VHD files on a volume that uses Encrypted File System (EFS).
D. Store the VHD files on a dedicated Dynamic NTFS Volume.
Correct Answer: B

QUESTION 10
You manage a deployment of Microsoft System Center 2012 R2 Configuration Manager.
All client computers have the Configuration Manager client installed.
Users are members of the local Administrators group on their respective computer.
You are preparing the documentation for the support staff to remediate client issues.
You need to identify which issues will be resolved by auto-remediation.
Which three issues should you identify? Each correct answer presents part of the solution.
A. The WMI service was stopped by a user.
B. The WMI service was disabled by a user.C. The SMS Agent Host service was removed by a user.
D. The Configuration Manager scheduled tasks were deleted by a user.
E. The Configuration Manager scheduled tasks were disabled by a user.
F. The SMS Agent Host service was stopped by a user.
Correct Answer: ABF

Reference: https://www.leads4pass.com/70-696.html dumps pdf questions and answers free update.

« Previous Page — Next Page »

You Missed

010-151 010-151 DCTECH Exam 010-151 dumps 010-151 dumps exam practice 010-151 dumps exam questions 010-151 exam 010-151 exam practice 010-151 exam questions 010-151 free practice CCT Cisco

New Cisco 010-151 dumps and free practice tests online

500-560 500-560 dumps 500-560 dumps exam questions 500-560 dumps topic exam questions 500-560 exam practice 500-560 online practice Cisco

Latest Lead4Pass Cisco 500-560 dumps Update Sharing

100-490 100-490 dumps 100-490 dumps Exam Questions 100-490 exam practice 100-490 exam questions 100-490 online practice 100-490 RSTECH Exam Solutions CCIT Cisco

Cisco 100-490 RSTECH Exam Solutions | Latest 100-490 Dumps

400-007 400-007 dumps 400-007 exam 400-007 exam practice 400-007 exam questions 400-007 Online practice 400-007 PDF dumps 400-007 practice test 400-007 VCE dumps CCDE v3.0 Cisco

Lead4Pass 400-007 dumps | Practice the latest 400-007 exam questions