Lead4Pass 100-490 Dumps contains 60 latest exam questions and answers, covering more than 90% of Cisco 100-490 “Supporting Cisco Routing & Switching Network Devices! For your best Exam Solutions.
Lead4Pass 100-490 exam questions and answers are updated throughout the year! Guaranteed to be available anytime! Download 100-490 Dumps: https://www.leads4pass.com/100-490.html
One-time use 365 days free update! You can also choose the learning method that suits you according to your learning habits: PDF and VCE learning formats are provided to help you learn easily and pass Cisco 100-490 RSTECH Exam successfully.
Here you can always get more: Lead4Pass 100-490 dumps page provides download free Demo for you to experience, you can also participate in the following online practice tests
Latest Cisco 100-490 dumps Exam Questions:
| From | Number of exam questions | Associated certification | Exam name |
| Lead4Pass | 15 | CCT Routing and Switching | Supporting Cisco Routing & Switching Network Devices |
Question 1:
Which Xmodem option is used to enhance error checking of an image that is copied to flash memory?
A. -e
B. -r
C. -c
D. -x
Correct Answer: C
Question 2:
What are the two purposes of a USB thumb drive? (Choose two.)
A. to save the system log
B. to copy configuration files to and from a PC
C. to save router hardware information
D. to copy IOS images to and from a PC
E. to increase system memory size
Correct Answer: BD
Question 3:
Which two commands identify the serial number of a Cisco router? (Choose two.)
A. show run
B. show inventory
C. show environment
D. show version
E. show archive
Correct Answer: BD
Question 4:
Which bits represent the boot field in the configuration register value?
A. highest two bits
B. lowest two bits
C. highest four bits
D. lowest four bits
Correct Answer: D
Question 5:
Which type of memory stores the configuration of a router or switch by default?
A. RAM
B. ROM
C. NVRAM
D. flash
Correct Answer: A
Question 6:
Which two statements about Telnet and SSH are true? (Choose two.)
A. SSH is a protocol that provides a secure remote access connection to network devices.
B. SSH uses the well-known TCP port 23 for its communication.
C. A Telnet network management connection is dropped when a router reboots.
D. Telnet is a protocol that provides a secure remote access connection to network devices.
E. Telnet is preferred over SSH for security reasons.
Correct Answer: AC
Question 7:
Which command initiates the transfer of a Cisco IOS image over IP from ROMMON?
A. Xmodem
B. copy tftp: flash:
C. copy flash: tftp:
D. tftpdnld
Correct Answer: D
Question 8:
Which type of transceiver module is used for 40 Gigabit Ethernet connectivity?
A. SFP+
B. GBIC
C. QSFP+
D. XFP
Correct Answer: C
Question 9:
Which address facilitates the routing of packets over an IP network?
A. physical
B. transport
C. network
D. MAC
Correct Answer: C
Question 10:
Which two commands set the configuration register value? (Choose two.)
A. rommon>confreg 0x2102
B. router(config)#confreg 0x2102
C. rommon>config-register 0x2102
D. router(config)#configuration-register 0x2102
E. router(config)#config-register 0x2102
Correct Answer: AE
Question 11:
From the enable mode, which command loads the configuration during the password recovery process on a Cisco router?
A. load_helper
B. configure terminal
C. copy running-config startup-config
D. copy startup-config running-config
Correct Answer: D
Question 12:
Which device is a DTE device?
A. CSU/DSU
B. router
C. cable modem
D. DSL modem
Correct Answer: B
Question 13:
What does Cisco use for Return Materials Authorization tracking of field-replaceable parts?
A. product number
B. serial number
C. RMA number
D. FRU number
Correct Answer: C
Question 14:
Which type of port is used to connect a laptop to an Ethernet port on a Cisco router?
A. rollover
B. fiber
C. straight-through
D. crossover
Correct Answer: C
Question 15:
ESD is the sudden and momentary electric current that flows between two objects at different electrical potentials, caused by direct contact or induced by an electrostatic field. Which three tools are used to avoid ESD? (Choose three.)
A. negative static bag
B. antistatic mat
C. ESD wrist strap
D. negative static mat
E. antistatic bag
F. latex gloves
Correct Answer: BCE
…
Lead4Pass 100-490 Dumps contains 60 latest exam questions and answers, one-time use enjoys free updates for 365 days! It also provides PDF and VCE multiple learning formats to assist you in easily learning and passing the Cisco 100-490 RSTECH Exam!
Use Cisco 100-490 RSTECH Exam Solutions: Download 100-490 dumps with PDF and VCE: https://www.leads4pass.com/100-490.html, to help you pass the exam 100% successfully.