At Lead4Pass you can get the new Huawei H13-341 dumps with the most accurate H13-341 dumps exam questions and answers. Huawei H13-341 Dumps by Lead4Pass is the most important exam material that will prepare you to successfully pass the H13-341 Huawei Certified internetwork Expert – Transmission exam. The latest Huawei H13-341 dumps issues are managed and organized by top certified professionals in the IT field. Follow the Lead4Pass H13-341 new exam dumps and you can be successful on the first try.

Huawei H13-341 free dumps shared below you can verify first

QUESTION 1

In the case of the OptiX OSN equipment, when the standby board is normal, which of the following operations does not cause the active/standby switching of the cross-connect board or clock board?

A. Delete the active cross-connect board or clock board logically.
B. Open the upper and lower ejector levers of the active board at the same time.
C. Deliver the active/standby switchover command.
D. Perform a cold reset on the cross-connect or clock board.

Correct Answer: A

QUESTION 2

Which of the following protection schemes require the APS protocol?

A. ODUk SPRing protection
B. ODUk SNCP
C. SW SNCP
D. 1:1 optical line protection

Correct Answer: A

QUESTION 3

Which of the following statements about MPLS is wrong?

A. MPLS has two planes: the control plane and the forwarding plane. The control plane is connection-oriented, the forwarding plane is connectionless.

B. MPLS is not a service or application. It is a standard routine and switching platform that supports various upper-layer protocols and services.

C. In the packet transport field, the MPLS technology is mainly used to construct tunnels to carry various types of services (for example, TDM, ATM, and Ethernet) transmitted by PWE3 to implement end-toend transmission of services on packet networks.

D. MPLS packet forwarding is based on labels.

Correct Answer: A

QUESTION 4

Which of the following is not included in an ASON network?

A. ASON Domain
B. ASON NE
C. SC
D. TE Link

Correct Answer: C

QUESTION 5

Which of the following is not a PW APS switching condition?

A. A warm reset is performed on the board.
B. The board software is faulty.
C. MPLS_PW_SF
D. A cold reset is performed on the board.

Correct Answer: A

QUESTION 6

What are the wavelengths of the OSC channel used by the ST2 board?

A. 1510nm
B. 1491nm
C. 1511nm
D. 1471 nm

Correct Answer: C

QUESTION 7

When the grooming service level of the line board is ODUflex, which of the following protection schemes can be supported?

A. ODUk SPRing protection
B. Tributary SNCP
C. SW SNCP
D. ODUk SNCP

Correct Answer: D

QUESTION 8

Which of the following is not a precaution after board replacement?

A. Record the settings of jumpers and DIP switches on the board.
B. For functional units that have backups, check whether the switchover is normal.
C. Check the indicator blinking status of the board and ensure that the board works properly.
D. Ensure that no abnormal alarm.

Correct Answer: B

QUESTION 9

The LOA board can implement the L2 scheduling function of the Ethernet in OSN 1800.

A. True
B. False

Correct Answer: B

QUESTION 10

Which of the following trails can be configured on the NMS?

A. OTS
B. ODUk
C. client
D. OCh

Correct Answer: B

QUESTION 11

Loopback is a common operation for routine maintenance and troubleshooting. Which of the following statements about loopback operations are incorrect?

A. The hardware loopback is performed by using the fiber jumper or self-loop cable to perform the loopback on the optical port or electrical port.

B. When performing a hardware loopback on an optical port, you need to add an optical attenuator.

C. After the out loop is performed, the signals are transmitted to the internal.

D. After the loop is performed, the signals are transmitted to the external.

Correct Answer: D

QUESTION 12

Which of the following statements about the electrical-layer overhead processing source function are correct?

A. The OPUk performs client signal mapping, frequency adjustment, and rate adaptation in the transmit direction.

B. The ODUkT calculates the BIP-8 and writes it into the TCMi.

C. The OTUk calculates BIP-8 and writes it into SM, GCC0, FAS, and MAFS.

D. the ODUkP calculates overheads such as BIP-8, PM, and GCC1/2.

Correct Answer: C


H13-341 free dumps online download: https://drive.google.com/file/d/1MZYBd2_6jWUPoex34aqIk_hYPH4dopOd/view?usp=sharing

Share 12 Huawei H13-341 free dumps online, including 60 newly updated Huawei H13-341 dumps exam preparation materials to help you successfully pass the Huawei Certified internetwork Expert – Transmission exam on the first try.

By admin

ExamPdfDownload - The real IT certification material preparation community, sharing PMI, ServiceNow, Huawei free dumps, exam PDFs, and exam dump recommendations throughout the year. Helps you practice tests online. The best learning community for you to pass the exam.